Our products
Fire Detection Sytem
- GST100

Single loop panel with capacity of 128 addressable devices, 8 zone, built-in printer, 2 Bell Circuit, Integrated PSU with Battery Charger, Excluding Batteries. - GST200N-1

Single loop with capacity of 235 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100-240V) with Battery Charger, Excluding Batteries (Certified by LPCB). - GST200N-2

Two loops with capacity of 477 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100-240V) with Battery Charger, Excluding Batteries (Certified by LPCB). - GST-IFP8

Modularized 8 loop with capacity of 1936 devices. Flush-mount new structure. 140 Zone, 2 Bell Circuit, built-in printer, Integrated PSU with Battery Charger, Excluding Batteries, 1 Loop card configured as standard(2 loops) (Certified by LPCB). - GST104A

4 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater Output against per zone,Built-in Battery Charger, Excluding Batteries (Certified by LPCB). - GST108A

8 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater Output against per zone,Built-in Battery Charger, Excluding Batteries (Certified by LPCB). - GST116A

16 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater Output against per zone,Built-in Battery Charger, Excluding Batteries (Certified by LPCB). - GST-IFP4M

Touch screen, modularize design, with capacity up to 6 loops/1452-points. Gray color cabinet, wall-mount or flush- mount structure, built-in main CPU card (MP-400+MP-401),NAC card (NC-400),power supply and battery charger (charge up to 65 AH). Loop card, Zone Display(Control) Panel, external battery box and battery excluded. - GST301

Conventional Gas Release Control Panel, 2+1 Detection Zones, Integrated PSU with Battery Charger, Excluding Batteries. - GST-FT8WN

8 Zone Wall Mount, 24VDC Powered, zone line monitored for fault of open circuit and short circuit, networkable with FT24N and FT40N panels.
- GST-FT24N

24 Zone Rack Mount, 24VDC Powered, zone line monitored for fault of open circuit and short circuit, networkable with FT8WN and FT40N panels. - GST-FT40N

Conventional Fire Telephone Panel, 40 Zone Rack Mount, 24VDC Powered, networkable with other fire telephone panels. - C-9317

Emergency Start/Abort Switch, Compatible with GST301, GST303 and GST306. - C-9318

Backlight LED Lighting warning Indicator. - GST852RP

Passive LCD Repeater. Compatible with GST100, GST200 series, GST5000 series and GST-IFP8. - GST-NRP00

Active Repeater with Full Function Control. Compatible with GST200 series, GST5000 series and GST-IFP8 panel, additional network card need to be ordered. - GST-RP16

16 Zones Alarm and General Fault Indication, Compatible with GST102A, GST104A, GST108A and GST116A Panels. - GST-MNA2C

Touch screen, active annunciator with full function monitor and control. Compatible with GST-IFPxM series panel, built in CAN class A network interface, UL listed. - DI-9101E

Intelligent Combination Heat Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without base (Certified by LPCB). - DI-9102E

Intelligent Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without base (Certified by LPCB).
- DI-9103E

Intelligent Rate of Rise and Fixed Temperature Heat Detector, programmable A1R/A2S/BS Alarm, With Remote Indicator Output and Magnetic Test Function, Without base(Certified by LPCB). - I-9104

Intelligent Ultra-Violet Flame Detector, without base, compatible base DZ-03. - DI-9105E

Intelligent Reflective Beam Detector with 4 pieces Reflectors, Loop powered,integral visible laser pointer and 2 bits digital tube for easy alignment. Detection Range 5-100 Meters (Certified by LPCB). - I-9602LW-LPG

Available for LPG on Order, 24VDC Powered, with Local Buzzer Alarm. - GST-JL

6″ Red Gong, 24VDC, nominal 21mA, 95dB(24VDC) at 3m. - DC-9101E

Conventional Combination Heat Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without Base (Certified by LPCB). - DC-9102E

Conventional Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without base (Certified by LPCB). - DC-9103E

Conventional Photoelectric Smoke Detector, Programmable A1R/A2S/BS Alarm, With Remote Indicator Output and Magnetic Test Function, Without Base (Certified by LPCB). - DC-9101(IS)

Intrinsically Safe Conventional Combination Heat Photoelectric Smoke Detector, 3 level sensitivities and fixed temperature or rate of rise programmable mode, magnetic test. Applicable to zone 1 and zone 2 of areas with explosion-proof requirement in petroleum and chemical industries. - DC-9102(IS)

Intrinsically Safe Conventional Photoelectric Smoke Detector, applicable to zone 1 and zone 2 of areas with explosion-proof requirement in petroleum, chemical industries.
- DC-9103(IS)

Intrinsically Safe Conventional Rate of Rise and Fixed Temperature Heat Detector, A1R/BS Alarm level. Applicable to zone 1 and zone 2 of areas with explosion-proof requirement in petroleum, chemical industries.
- C-9602LW-LPG

Available for LPG on Order, 220VAC Powered, N/O Relay Output, with Local Buzzer Alarm. - S-9102R

Local Buzzer Alarm, Manual Test Button, contact rating 30VDC @ 60mA. - DI-9204E

Flush mount Resettable (Non-Breaking Glass), Supplied with surface mount back box and Special Reset Key,(Certified by LPCB). - DC-9204E

Resettable (Non-Breaking Glass), Supplied with surface mount back box and Special Reset Key(Certified by LPCB). - DC-9202(IS)

Intrinsically Safe Conventional Manual Call Point, Applicable to inflammable and explosive areas in petroleum, chemical industries. - DC-9403(IS)

Intrinsically Safe Conventional Sounder Strobe. - DC-9404(IS)

Intrinsically Safe Conventional Sounder. - DI-9204Exd

Flame Proof manual call point, IP65, ExdⅡBT6 Gb/DIP A20 TA,T6 (Certified by ATEX). - DI-9104Exd

Possible be Addressable by Applied Addressable Loop, or Conventional by Applied 24VDC (Certified by ATEX).
- D-9105RExd

Possible be Addressable by Applied Addressable Loop, or Conventional by Applied 24VDC. - D-9107RExd

Possible be Addressable by Applied Addressable Loop, or Conventional by Applied 24VDC (Certified by ATEX). - I-9401N

Addressable Combined Sounder and Strobe, 24VDC required. - I-9403

Addressable Sounder with Visible Indicator, 16 tones, high/low consumption modes, can be loop powered or 24VDC powered, 83-89dB (Certified by LPCB). - C-9401N

Conventional Combined Sounder and Strobe. - C-9403

2 tones, Conventional Sounder with Visible Indicator, Tone 1, (Certified by LPCB). - DI-9300E

Loop Powered, Din-rail mount or surface mount, monitor N/O or N/C dry contact input with cable supervised function. (Certified by LPCB). - DI-9301E

Loop Powered, Din-rail mount or surface mount, take one or two addresses, monitor N/O or N/C dry contact via input port, and provide N/O dry contact output. (Certified by LPCB). - DI-9319E

Input module for fault and alarm monitoring, Din-rail mount or surface mount, capable connect conventional detectors into addressable system, provide N/O or N/C dry contact fire alarm output , (Certified by LPCB). - DC-9503E

Din-rail mount or surface mount, zonal short circuit loop isolator (Max. 128 per loop) (Certified by LPCB).
- PSU24-5

5A 24VDC Intelligent PSU, Display shows DC Output Voltage and Load Current, Fully Monitored with Self-test Facilities, Excluding Batteries. - PSU24-10

PSU24-10 plus Addressable Functions. - P-9911 (F)

Fixed Fire Telephone Handset. - P-9911 (M)

Fire Telephone Mobile Handset. - P-9911(H)

Hand Free Fire Telephone. - P-9911 (J)

Fire Telephone Jack Socket. - P-9910B

Portable Programming Tool for Addressing, Presetting and Testing of Devices.
Fire Protection System
- VESDA-E VES

Multi stage filtration and optical protection. - VESDA-E VEP

Clean air barriers ensures lifetime detection. - VSP-005

Single cartridge. - VLF-500

Up to 500 m2 (5,380 sq. ft.) coverage. - OSI-10

Maximum detection range of 200 m.
- SIEX FM 200

Gas FM-200 merupakan gas yang terdiri dari unsur kimia yaitu Heptafluoropropane (CF3CHFCF3). - SIEX IG

Gas IG merupakan gas yang terdiri dari beberapa unsur kimia yaitu argon, nitrogen dan CO2. - SIEX NOVEC
Gas novec merupakan gas yang terdiri dari unsur kimia yaitu Flouroketone CF3CF2C(O)CF(CF3)2 . - SIEX CO2

Gas CO2 merupakan gas yang terdiri dari beberapa unsur kimia yaitu atom karbon dan atom oksigen.
